R2 to SS7 SIP Signaling Converter

SP230 R2 Adapter (replaced with TMG3200 or TMG7800 series)

SP201 R2 Adapter (replaced with TMG800 series)

SP201SA R2 Adapter (replaced with QuadroM Dual T1/E1 Gateway

QuadroM R2 Adapter for ISDN conversion

R2 Adapter Solutions

R2 Adapter to ISDN using QuadroM Gateway! ISDN Signaling Converter

Teleprime Advanced Communications Division sells state of the art R2 Adapter products for your CAS, ISDN, SS7, SIP, SIGTRAN and other adapter requirements.

What is a R2 Adapter?

A R2 adapter is a device that interfaces legacy network R2 signaling and enables network connectivity by performing R2 signaling conversion between various switches and equipment that use different signaling protocols.  To inter-work standardized signaling protocols like SIGTRAN, SIP, SS7, C7, C5 (N5), DTMF, R1, R2, ISDN, and other CAS or CCS signaling based protocols, the R2 Adapter is required. Applications for switches, VoIP gateways or next generation networks  can be enabled by our R2 Adapter.  For newer VoIP and SIGTRAN networks, the R2 Adapter offers a low cost WAN access to SIP, SIGTRAN and SS7 or C7 based networks. Teleprime Advanced Communications Division now offers low cost IP web portal based provisioning for our R2 Adapter products.  Teleprime ACD introduces the next generation, high performance TMG series and QuadroM series R2 Adapter products.

If you need a R2 Adapter Please review our R2 Adapter product line below:


R2 Adapter Products

R2 Adapter to ISDN for PRI Euro or NI-2 ISDN to R2 signaling conversion

Single Span (1 E1/T1 port to another E1/T1 port) QuadroM Dual E1/T1 R2 Adapter

The QuadroM Dual E1/T1 R2 Adapter provides an economical entry level signaling converter solution for applictions using SIP, H.323, PRI ISDN or CAS signaling protocols. The QuadroM R2 Adapter supports SIP, H.323, PRI ETSI/ANSI ISDN and CAS (R1,R2,DTMF/MF) based protocols in a single 1U rack mounted chassis. . The QuadroM includes call routing functions in the platform for solving R2 network signaling incompatibilities today. It may increase your potential to connect to a larger portion of the world market and may eliminate or reduce charges you may incur for network connections.


R2 Adapter using QuadroM

R2 Adapter for SIGTRAN, CCS - SS7 or C7 or PRI ETSI or ANSI ISDN and CAS ( R2 ) - High performance TMG Series

The TMG-series R2 Adapters are an advanced R2 signaling converter scalable platform designed to facilitate interoperability between incompatible R2 signaling communication networks. The TMG-series R2 Adapters enable a seamless interface between in-band and out-of-band signaling networks, and between other out-of-band networks. It has the capability to support CAS R2, ANSI/ITU SS7 (C7), SIP, SIGTRAN and Primary Rate (PRI) ISDN signaling protocols. TMG-800 R2 Adapter capacity ranges from 2 T1/E1 ports to 8 T1/E1 ports. The TMG-3200 series R2 Adapters can scale from 8 to 64 T1/E1 ports and the TMG7800 R2 Adapters can range from 8 to 1024 T1/E1 ports. TMG-3200 and TMG-7800 series R2 Adapters also support direct DS-3 and STM-1 or OC3 terminations.


TMG Series R2 Adapter Products

Home | Product | Support | Legal |

What is a SS7 to SIP Gateway? - SS7 to SIP Gateway

What is a Signaling Gateway? - Signaling Gateway

What is a VoIP Gateway?

What is a Signaling Converter? - Signaling Converter

What is a SS7 Signaling Gateway? - SS7 Signaling Gateway